Submission guidelines


Thank you for contributing to Oral & Implantology. Please read the instructions carefully and observe all the directions given. Failure to do so may result in unnecessary delays in publishing your article.

 

MANUSCRIPT FORMAT

Article Types: limits

The following graph shows what types of articles are accepted for publication, and what requirement they may have.

 Article Type  Abstract Limit   Total Words  Figures/Tables References
Original Article 300 words  2000 words  5  35
Systematic Review 300 words  3500 words  5  70
Meta-analysis  300 words  3500 words 6  70
Concise Review  200 words  2000 words 4  50
Case Report  200 words  1500 words  3  30
Editorials  Not applicable  No limit  No limit  No limit
 Statements  300 words  No limit  6  No limit
Position Papers  300 words  No limit 6  No limit

 

General Guidelines

  • You must submit a digital copy of your manuscript.
  • Keep the format of your manuscript simple and clear. We will set your manuscript according to our style—do not try to “design” the document.
  • The manuscript, including the title page, abstract and keywords, text, references, figure captions, and tables should be typewritten, double-spaced in 12-point font with 1-inch margins all around and saved as one file.
  • Each figure should be saved as its own separate file. Do not embed figures within the manuscript file.
  • Keep abbreviations to a minimum and be sure to explain all of them the first time they are used in the text.
  • The manuscripts should be written in consistent British or American English.
  • The authors should use Système International (SI) measurements. For clarity, nonmetric equivalents may be included in parentheses following the SI measurements.
  • Use generic names for drugs. You may cite proprietary names in parentheses along with the name and location of the manufacturer.
  • Credit suppliers and manufacturers of equipment, drugs, and other brand-name material mentioned in the manuscript within parentheses, giving the company name and primary location

 

Title Page

  • This journal adheres to a single-blinded peer-review policy. The title page should be included in the main document.
  • The title page should list the article title and the corresponding author’s full name, degree, title, department, affiliation, mailing address, e-mail address, and telephone and fax numbers. It should also list the full name, department, and affiliation of every co-author.

 

Abstract and Keywords, Text, Number of Figures and Tables, Number of References

See the section Article Types for limits.

The abstract should briefly outline the content of the article and any conclusions it may reach. The keywords should be words a reader would be likely to use in searching for the content of the article.

Original Articles, Systematic Reviews, Meta-analyses, Statements and Position Papers: the abstracts should be a maximum of 300 words and structured in the following format:
Purpose: One or two sentences that simply state purpose with no background information.

Methods: Provide details about the methods of the study, including data analysis.

Results: Present most important findings of the study. Please provide numbers (means with standard deviations or medians with ranges) to support your findings, and results of significance tests, e.g. p-values.

Conclusions: One or two sentences that state only what your study identified and actually demonstrated.

Please do not include comments or information not supported by the data of your study. Level of Evidence (for human studies) or Clinical relevance (basic science in-vitro or in-vivo study: why is this study important from a clinical standpoint?).

Key Words: Please provide at least 4 key words for indexing.
For the number of figures/tables and references, see the manuscript format article types table.

Concise Review or Case Report, the abstract should be an unstructured summary (maximum length, 200 words).

Key Words: Please provide at least 4 key words for indexing.

 

Main Document

  • The text should be structured in the standard IMRAD (Introduction, Methods, Results, Discussion) format.
  • Papers including human or animal subjects must include a statement of approval by appropriate agencies in the text.
  • Use generic names of drugs or devices. If a particular brand was used in a study, insert the brand name along with the name and location of the manufacturer in parentheses after the generic name when the drug or device is first mentioned in the text.
  • Quantities and units should be expressed in accordance with the recommendations of the International System of Units (SI).
  • When abbreviations are used, give the full term followed by the abbreviation in parentheses the first time it is mentioned in the text.
  • Please clearly distinguish the hierarchy of headings within the manuscript by using capital letters, underline, italic, and bold styles as necessary.
  • Do not insert page or section breaks except where noted in the Author Instructions.
  • Use hard returns (the Enter key) only at the end of a paragraph, not at the end of a line. Allow lines of text to break automatically in your word-processing software. Do not justify your text.
  • Use only one space, not two, after periods.
  • Create tables using the Table function in Microsoft Word.

 

Acknowledgments

The source of any financial support received and recognition of personal assistance for the work being published should be indicated at the end of the article, just before the Reference section, under the heading Acknowledgments.

 

Conflict of Interest (see “Editorial Policy Statements”)

The declaration must be included at the end of the manuscript, following any acknowledgments and prior to the references, under the heading ‘Conflict of Interest Statement’. If no declaration is made, the following will be printed under this heading in your article: ‘None Declared’.

Alternatively, you may wish to state that ‘The author(s) declare(s) that there is no conflict of interest’.

 

References

References should be the most recent and pertinent literature available. It is essential that they are complete and thoroughly checked. If the reference information is incomplete, good online sites to search for full details are the National Library of Medicine: www.nlm.nih.gov; Books in Print: www.booksinprint.com; PubMed: www.ncbi.nlm.nih.gov/PubMed/; or individual publisher Web sites.

  • References must be listed in AMA style, using Index Medicus journal title abbreviations.
  • References follow the article text. Insert a page break between the end of text and the start of references.
  • References must be cited sequentially (NOT alphabetically) in the text using superscript numbers.
  • By way of exception to AMA style, do not italicize book titles or journal title abbreviations and do not put a period at the end of a reference.
  • List all author names, up to and including six names. For more than six authors, list the first three followed by et al.
  • References should be styled per the following examples:
  1. Citing a journal article:

Newburger JW, Takahashi M, Burns JC, et al. The treatment of Kawasaki syndrome with intravenous gamma-globulin. N Engl J Med. 1986;315(1):341-7.

  1. Citing a chapter in a book:

Toma H. Takayasu’s arteritis. In: Novick A, Scoble J, Hamilton G, eds. Renal Vascular Disease. Philadelphia: WB Saunders; 1995:47-62.

  1. Citing a book:

Stryer L. Biochemistry. 2nd ed. San Francisco: WH Freeman; 1981:559-96

  1. Citing a thesis:

Stern I. Hemorrhagic Complications of Anticoagulant Therapy [Ph.D. dissertation]. Evanston, IL: Northwestern University; 1994.

  1. Citing a government publication:

Food and Drug Administration. Jin Bu Huan Herbal Tablets. Rockville, MD: National Press Office; April 15, 1994. Talk Paper T94-22.

  1. Citing an online article:

Rosenthal S, Chen R, Hadler S. The safety of acelluler pertussis vaccine vs whole-cell pertussis vaccine [abstract]. Arch Pediatr Adolesc Med [serial online]. 1996;150:457-60. Available at: http://www.ama-assn.org/sci-pubs/journals/archive/ajdc/vol_150/no_5/abstract/htm. Accessed November 10, 1996

  1. Citing a symposium article:

Eisenberg J. Market forces and physician workforce reform: why they may not work. Paper presented at: Annual Meeting of the Association of American Medical Colleges; October 28, 1995; Washington, DC

 

Figure Captions

  • Figures include photographs or radiographs, drawings, graphs, bar charts, flow charts, and pathways, but NOT lists or tables.
  • Figures must be cited sequentially in the text. Number all figures (and corresponding figure captions) sequentially in the order they are cited in the text.
  • Figure captions should be written after the reference list. Insert a page break between the end of references and the start of figure captions.
  • Figure captions should include a description of the figure and/or each lettered part (A, B, etc.) and of any portions of the figure highlighted by arrows, arrowheads, asterisks, etc.
  • For a figure borrowed or adapted from another publication (used with permission), add a credit line in parentheses at the end of each figure legend. This credit line should be a complete bibliographic listing of the source publication (as a reference), or other credit line as supplied by the copyright holder. For example (Reprinted with permission from Calfee DR, Wispelwey B. Brain abscess. Semin Neurol 2000;20:357).

 

Tables

  • Data given in tables should be commented on but not repeated in the text. Be sure that lists or columns of related data are composed in a word-processing program like the rest of the text.
  • Do not intersperse tables in the text. Tables should appear after the figure captions. Insert a page break between the end of the figure captions and the start of the tables.
  • Tables must be double-spaced and numbered in the same sequence they are cited in the text. A short descriptive title should be provided for each table.
  • If a table contains artwork, supply the artwork separately as a digital file.
  • For tables borrowed or adapted from another publication (used with permission), add a credit line as the first footnote beneath each table. This credit line should be a complete bibliographical listing of the source publication (as a reference), or other credit line as supplied by the copyright holder. For example, “Reprinted with permission from Calfee DR, Wispelwey B. Brain abscess. Semin Neurol 2000;20:357.” (“Data from . . .” or “Adapted from . . .” may also be used, as appropriate.)
  • Other footnotes for tables should be indicated in the table using superscript letters in alphabetical order.
  • Any abbreviations used in the table should be explained at the end of the table in a footnote.
DIGITAL ARTWORK PREPARATION

General Guidelines

  • It is best to use Adobe Photoshop to create and save images, and Adobe Illustrator for line art and labels.
  • Do not submit art created in Microsoft Excel, Word, or PowerPoint. These files cannot be used by the typesetter.
  • Save each figure in a separate file.
  • Do not compress files.
  • All black-and-white and color artwork should be at a resolution of 300 dpi (dots per inch) in TIFF format. Line art should be 1,200 dpi in EPS or TIFF format. Contact the Production Editor at Thieme if you are unsure of the final size.
  • It is preferable for figures to be cropped to their final size (approximately 3½ inches for a single column and up to 7 inches for a double column), or larger, and in the correct orientation. If art is submitted smaller and then has to be enlarged, its resolution (dpi) and clarity will decrease.

Note: Lower resolutions (less than 300 dpi) and JPEG format (.jpg extension) for grayscale and color artwork are strongly discouraged due to the poor quality they yield in printing, which requires 300 dpi resolution for sharp, clear, detailed images. JPEG format, by definition, is a lower resolution (compressed) format designed for quick upload on computer screens.

 

Black-and-White Art

  • Black-and-white artwork can be halftone (or grayscale) photographs, radiographs, drawings, line art, graphs, and flowcharts. Thieme will only accept digital artwork.
  • If possible, do not send color art for conversion to black-and-white. Do the conversion yourself so that you can check the results and confirm in advance that no critical details are lost or obscured by the change to black-and-white.
  • For best results, line art should be black on a white background. Lines and type should be clean and evenly dark. Avoid screens or cross-hatching, as they can darken or be uneven in printing and lead to unacceptable printing
  • All color artwork should be saved in CMYK, not RGB.

 

Art Labels

  • Arrows, asterisks, and arrowheads (or other markers) should be white in dark or black areas and black in light or white areas, and large in size. If not, these highlighting marks may become difficult to see when figures are reduced in size during the typesetting process.
  • Use 1-point (or thicker) rules and leader lines.
  • Capitalize the first word of each label and all proper nouns. Consider using all capitals if you need a higher level of labels.
  • Where there are alternate terms or spellings for a named structure, use the most common one and make sure it is consistent with what is used in the text.
  • Avoid using multiple fonts and font sizes for the labels; use only one or two sizes of a serif font.
SUBMISSION PROCEDURE

Submission Procedure

  • Consult the checklist on the first page of this document to ensure that you are ready to submit your manuscript.
  • Manuscripts must be submitted electronically at the following link.
  • Always review your manuscript before submitting it. You may stop a submission at any phase and save it to submit later. After submission, you will receive a confirmation email. You can also check the status of your manuscript by logging in to the submission system. The Editor in Chief will inform you via email once a decision has been made.

 

Revision Procedure

  • Should the editors decide that your article requires a revision, you will need to make the changes via a word-processing program and resubmit it electronically.
  • Log In to the submission system and find your article, which will be marked for revision.
  • The best way to make revisions to your manuscript is by enabling the Track Changes mode in Microsoft Word, which will automatically highlight and mark up revised text. Please submit both a marked-up copy and a clean copy of your revised manuscript to the submission system.
  • Your original files will still be available after you upload your revised manuscript, so you should delete any redundant files before completing the submission.
  • You will also be provided space in which to respond to the reviewers’ and editors’ comments. Please be as specific as possible in your response.
PRODUCTION PROCEDURE

Page Proofs 

Page proofs will be sent to you via email. The proofs will be in a PDF file format, which should be opened using Acrobat Reader software. You will receive further instructions with your proofs. Take this opportunity to check the typeset text for typographic and related errors. Elective alterations are difficult to accommodate owing to the associated time and expense of introducing them. Therefore, please be sure that when you submit your manuscript, it is accurate, complete, and final.

POLICY STATEMENTS

Statement on Liability

The legislation on product liability makes increased demands on the duty of care to be exercised by authors of scientific research and medical publications. This applies in particular to papers and publications containing therapeutic directions or instructions and doses or dosage schedules. We therefore request you to examine with particular care, also in your own interest, the factual correctness of the contents of your manuscript once it has been copyedited and returned to you in the form of galley proofs. The responsibility for the correctness of data and statements made in the manuscript rests entirely with the author.

Definition of Authorship

Authorship credit should be based on criteria established by the International Committee of Medical Journal Editors. Each author should have made the following contributions towards the completion of the manuscript:

  1. Substantial contributions to conception and design, acquisition of data, or analysis and interpretation of data
  2. Drafting the article or revising it critically for important intellectual content
  3. Final approval of the version to be published

Copyright Statement

Submitted manuscripts must represent original research not previously published nor being considered for publication elsewhere. The editors and combat plagiarism, double publication, and scientific misconduct.

Your manuscript may be subject to an investigation and retraction if plagiarism is suspected.

If you plan to reproduce text, tables, or figures from a published source, you must first obtain written permission from the copyright holder (usually the publisher). This is required even if the material is from your own published work. For material never before published and given to you by another person, you must obtain permission from that person. Serious delays to publication can be incurred if permissions are not obtained.

As the author, it is your responsibility to obtain all permissions, pay any permission fees, furnish copies of permissions to EGO with your manuscript, and include a credit line at the end of the figure caption, beneath the table, or in a text footnote.

Upon publication of an article, all rights are held by the publishers, including the rights to reproduce all or part of any publication. The reproduction of articles or illustrations without prior consent from the publisher is prohibited.

Statement of Ethics

This journal adheres to the ethical standards described by the Committee on Publication Ethics and the International Committee of Medical Journal Editors. Authors are expected to adhere to these standards.

For all manuscripts reporting data from studies involving human or animal participants, formal review and approval, or formal review and waiver (exemption), by an appropriate institutional review board (IRB) or ethics committee is required, as well as any necessary HIPAA consent, and should be described in the Methods section with the full name of the reviewing entity. All clinical trials must be registered in a public trials registry. Denote the registry and registry number.

Patient Permission Policy

You must obtain a signed patient permission form for every patient whose recognizable photograph will be used. If you do not supply this, the identity of the patient must be obscured before the image is published; this could interfere with the instructive value of the photograph. (The following link is a sample patient permission form).

EDITORIAL CONTACTS

Please contact the Editors or Oral & Implantology with any questions.

Oral & Implantology – Editor in Chief
Alberto BARLATTANI

Oral & Implantology – Publisher
Dentistry Intermediary Services srls
Via Treviso n. 17/A 00161 Roma
P.I. e C.F 14806061009

Oral & Implantology – Managing Office
Donatella Alonzi
info@oimplantology.org